mtlp www.vishay.com vishay electro-films revision: 16-nov-17 1 document number: 61097 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wire bondable thin film micro-strip transmission line resistor arrays product may not be to scale mtlp series of thin film 50 ? micro-strip transmission lines with two rows of tuning pads are designed for test and measurement applications. standard configurations of the mtlp series include an array of wire bondable terminations that allow integration of discrete components. custom configurations includ ing open, short and load element are available upon request. features ? 50 ? micro-strip configuration ? wire bondable terminations ? alumina (99.6 %) substrate; as-fired or polished applications ? test and measurement setups ? network analyzer calibration elements ? rf bread boarding ? high frequency hybrid assemblies custom designed elements vishay efi will custom design additional geometries and form factors upon request. information about standard de sign rules can be found at www.vishay.com/doc?49109 standard electrical specifications parameter value unit characteristic impedance 50 ? mechanical tolerances 0.1 ( 4 m) mil operating temperature range -55 to +125 c dimensions in inches length width thickness 0.01 to 0.5 0.03 0.002 0.010 0.001 full ground plane on back s ide 0.01" (250 m) 0.03" (750 m) 0.01" (250 m) 0.004" (100 m) 0.0012" (30 m) 0.005" sq uare (125 m sq uare) 0.01" to 4" (0.25 mm to 100 mm) upon re q ue s t
mtlp www.vishay.com vishay electro-films revision: 16-nov-17 2 document number: 61097 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mechanical specifications parameter value substrate thickness 10 mils 1 mils (as-fied) 0.5 mils (polished) substrate material alumina 99.6 % metallization tiw (750 250 ?)/au (120 " min.) micro-strip line widt h 10 mils 0.1 mils available line lengths 0.010 " to 0.0500 " ordering information mtlp 300 p ws - 0.30 " mil long transmission line on polished alumina model length surface finish packaging code mtlp micro-strip transmission line with tuning pads xxx 010 015 020 055 090 300 f = as-fired p = polished ws = 100 mult, 1 min. waffle pack
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
